How to Install and Use EDIABAS 6.4.3 for BMW Diagnostic and Programming
EDIABAS is a low-level ECU communication software that is used by NCS Expert and WinKFP for BMW diagnostic and programming. It allows you to connect your BMW to a laptop or PC via a USB or Ethernet cable and access various modules and functions of your vehicle.
In this article, we will show you how to download, install and use EDIABAS 6.4.3 for BMW. This version of EDIABAS is compatible with DIS v57, which is a comprehensive diagnostic software for BMW. You will also need INPA, which is a user-friendly interface for EDIABAS.
Download EDIABAS 6.4.3 Full.rar
The first step is to download the EDIABAS 6.4.3 full.rar file from the link below. This file contains the EDIABAS software, the INPA interface, and the installation files for DIS v57.
EDIABAS 6.4.3 Full.rar Download Link
The file size is about 7.8 GB, so make sure you have enough space on your hard drive and a stable internet connection. You will need both parts of the file to fully install DIS v57.
Install EDIABAS 6.4.3 and DIS v57
After downloading the EDIABAS 6.4.3 full.rar file, you need to extract it using a software like WinRAR or 7-Zip. You will get two folders: BMW INPA / EDIABAS 6.4.3 + Install Files etc., and BMW DIS v57 / SSS v32 Installer Files.
Open the BMW INPA / EDIABAS 6.4.3 + Install Files etc. folder and run the setup.exe file as administrator. Follow the instructions on the screen to install EDIABAS and INPA on your laptop or PC.
Next, open the BMW DIS v57 / SSS v32 Installer Files folder and run the setup.exe file as administrator. Follow the instructions on the screen to install DIS v57 on your laptop or PC.
You may need to restart your computer after each installation.
Use EDIABAS 6.4.3 for BMW Diagnostic and Programming
To use EDIABAS 6.4.3 for BMW diagnostic and programming, you need to connect your BMW to your laptop or PC via a USB or Ethernet cable. You also need an interface device that supports EDIABAS, such as ICOM A, ICOM A2 , ICOM A3 , or ICOM Next A.
Once you have connected your BMW and your interface device, you can launch INPA from your desktop or start menu. INPA is a user-friendly interface for EDIABAS that allows you to select your vehicle model, module, function, and parameter.
You can use INPA to read and clear fault codes, display live data, activate components, reset adaptations, code modules, program modules, and more.
If you want to use DIS v57 for more comprehensive diagnostic functions, you can launch it from your desktop or start menu as well. DIS v57 is a software that uses EDIABAS to communicate with your BMW and perform various tests, procedures, and services.
You can use DIS v57 to diagnose faults, display live data, perform guided troubleshooting, reset service indicators, calibrate sensors, update software, and more.
EDIABAS 6.4.3 is a powerful software that allows you to diagnose and program your BMW using a laptop or PC. It works with DIS v57 and INPA, which are two of the most popular software for BMW enthusiasts and professionals.
If you want to download and install EDIABAS 6.4.3 for BMW, you can follow the steps in this article and use the link provided 29c81ba772